![]()
Product Description:
Promise Technology External Storage Products
Enterprise to SMB Level VTrak E-Class and J-Class Series
VTrak VTE610s-Single 3U Rackmount RAID Storage System
Mfg. Model Number:
Promise VTrak VTE610sS
RoHS Compliant
Features and Benefits:
Promise VTrak VTE610s is a Serial Attached SCSI (SAS-wide) to SAS/SATA2
3.0Gb/s RAID Storage System with optional Dual Controllers and SAS JBOD
Expansion for Enterprise.
Promise VTrak E-Class is a family of intelligent, dual controller,
SAS/SATA based storage arrays that fundamentally changes storage
economics from purchase and set up to operation and upgrades. Four 3Gb
SAS (Serial Attached SCSI) x4 host interface ports per controller
provide a reliable, high-performance alternative to Ultra SCSI 320
storage applications. Each standard 3U, 19" rack unit supports up to 16
off-the-shelf 3.5" SAS or SATA 3Gb/s drives. Attach up to four SAS JBODs
to deliver 80 drive bays of direct attached storage.
Direct Attached Storage remains a favorite of SMB operations
worldwide. Easy to configure and familiar even to novice system
administrators, SAS inherits all of the DAS attributes while leaving its
limitations far behind. With advanced multi-pathing capabilities,
cascade support and full redundancy, the VTrak E-Class goes where
parallel SCSI products cannot reach.
This enterprise-class, cable-less system design includes fully
redundant, hot-swappable controllers, power and cooling units. All
system components are constantly monitored using industry standard
protocols to ensure continuous operation in case of failure or component
malfunction. Dual active-active, failover/failback RAID controllers
provide redundant data paths to further help ensure availability.
RAID 6 (double parity) delivers the highest level of reliability and
data protection in a cost-effective solution. As the capacity of
storage arrays increases, so does the risk of encountering unrecoverable
read errors with single parity RAID levels. RAID 6 can handle
double-drive failures, thereby providing greater protection against data
loss. This also dramatically reduces the risk of catastrophic data loss
during RAID rebuilds.
Specifications:
Controllers:
Single Controller Configuration (E610s-Single), Upgradeable to redundant.
Drive Support:
Up to sixteen 3.5" hard drives for SAS/SATA II 3.0Gb/s
Direct connect in single controller configuration,
or use the Promise SATA MUX Adapter in dual I/O module configuration.
Support any mix of SAS and SATA II 3Gb/s drives simultaneously in the same system
Direct SATA LED support Staggered physical drive spin-up
External I/O Ports (per controller):
Four external SAS-wide host interface ports
One external SAS-wide expansion port for JBOD expansion (up to 4 VTrak JBOD Systems)
Data Cache:
Shared 512MB predictive data cache (max. to 2GB per controller from Promise)
Automatic write cache destaging
72-hour battery backup
Command Queue Depth:
512 commands per VTrak controller
(up to 1024 in some dual controller configurations)
RAID Levels:
RAID 0, 1, 1E, 5, 6, 10, 50, & 60. Any combination of these RAID levels can exist at the same time.
RAID Flexibility:
Configurable RAID stripe size: 64K, 128K, 256K, 512K and 1MB stripe size per disk.
Background task priority tuning: adjustment of minimum I/O reserved for server use during all background tasks
Hot spares:
Multiple global or dedicated hot-spare drives with revertible options
Max LUNs per subsystem:
256 in any combination of RAID levels and array types
Max LUNs per array:
32 logical drives (LUNs)
Support LUN Carving by allowing an array to be divided into multiple logical drives
RAID level, stripe size,
sector size and cache policy can be configured per LUN.
Support out of order logical drive deletion and re-creation.
Max LUNs per Target ID:
Up to 256, depending on host side driver and operating system.
LUN Mapping & Masking:
Support multiple hosts and initiator lists
Disk Data Formats:
Support Disk Data Format (DDF) for industry wide standardization and drive roaming between Promise RAID products
Background Activities:
Media Patrol, Background synchronizing, Foreground initialization, Rebuild, Redundancy Check, SMART condition pooling.
OCE (Online Capacity Expansion), RLM (RAID Level Migration).
Priority Control, Rate Control and watermarking per BGA in Disk and NVRAM.
PerfectRAID Data integrity functions:
*
Physical Drive Error Recovery:
PDM (Predictive Data Migration),
Replace un-healthy disk member in array, and keep array on normal status
during the data transition between healthy HD and replaced HD, Bad
Sector Mapping, Media Patrol, SMART, Hard/Soft Reset to recover HD from
bad status, HD
Power on/off control to recover HD hung status.
* Array Error Recovery:
Data recovery from bad sector or failed HD for redundant RAID, RAID
5/6 inconsistent data Prevent (Write Hole Table), Data content Error
Prevent (Read/Write Check Table), NVRAM event logging.
SCSI Commands:
Support extensive SCSI command set equivalent to SCSI/FC hard disk drives;
Variable sector size (512Byte to 4kB) to break legacy limitation;
16Byte CDB support for 64-bit LBA addressing.
Supported Operating Systems:
Windows 2003
Linux (Red Hat, SuSE)
Management Tools:
*
Operating System independent, Localized in multiple languages, SSL
Security support, WebPAM PROe via out-of-band Ethernet, Command Line
Interface or Command Line Utility via RJ-11 Serial Port or Ethernet
(Telnet).
* Standard Management Protocols: SNMP, WBEM/CIM.
* Auto, Express and Advanced configuration support for skilled users.
Management Interface & Protocol:
Embedded Web server and mgmt support, No host agent is needed.
Ethernet with RJ-11 Serial Port, SNMP, SSL, Telnet.
Email, audible (buzzer), and visible (LED) indicators.
Voltage:
100-240 Vac Auto-Ranging
Frequency:
50-60 Hz
Eletronic Current:
8A @ 100 Vac; 4A @ 200 Vac (current rating with two power cords).
Power Supply:
Dual 500W Power Supply, 100-240 Vac auto-ranging, 50-60 Hz, dual hot swap and redundant
with PFC, N+1 design.
Power Consumption:
108.38 Watts without HDD, 523.91 Watts with SAS HDD.
Dimensions (H x W x D):
131mm x 446.5mm x 561mm (5.2" x 17.6" x 22.1")
Safety/EMI:
CE, FCC ClassA, VCCI, cUL, TUV, CB, BSMI, C-Tick, MIC.
| Producent: | Promise |
| Dostępność: | dostępne do 3-5 dni |
| Gwarancja: | |
Z tym produktem nasi klienci kupują także:
» Set of 16 pcs of1TB @ 7,2krpm SATA 3,5" HDD
» Set of 16 pcs of 2TB @ 7,2krpm SATA 3,5" HDD
» Set of 16 pcs of 3TB @ 7,2krpm SATA 3,5" HDD
» Set of 16 pcs of 1TB @ 7,2krpm SAS 3,5" HDD
» Set of 16 pcs of 2TB @ 7,2krpm SAS 3,5" HDD
» Set of 16 pcs of 3TB @ 7,2krpm SAS 3,5" HDD
» Set of 16 pcs of 300GB @ 15krpm SAS 3,5" HDD
» Set of 16 pcs of 600GB @ 15krpm SAS 3,5" HDD
» Set of 16 pcs of 450GB @ 15krpm SAS 3,5" HDD
» Set of 12 pcs of 1TB @ 7,2krpm SATA 3,5" HDD
» Set of 12 pcs of 2TB @ 7,2krpm SATA 3,5" HDD
» Set of 12 pcs of 3TB @ 7,2krpm SATA 3,5" HDD
» Set of 12 pcs of 1TB @ 7,2krpm SAS 3,5" HDD
» Set of 12 pcs of2TB @ 7,2krpm SAS 3,5" HDD
» Set of 12 pcs of 3TB @ 7,2krpm SAS 3,5" HDD
» Set of 12 pcs of 300GB @ 15krpm SAS 3,5" HDD
» Set of 12 pcs of 450GB @ 15krpm SAS 3,5" HDD
» Set of 12 pcs of 600GB @ 15krpm SAS 3,5" HDD
» Set of 8 pcs of1TB @ 7,2krpm SATA 3,5" HDD
» Set of 8 pcs of2TB @ 7,2krpm SATA 3,5" HDD
» Set of 8 pcs of3TB @ 7,2krpm SATA 3,5" HDD
» Set of 8 pcs of1TB @ 7,2krpm SAS 3,5" HDD
» Set of 8 pcs of 2TB @ 7,2krpm SAS 3,5" HDD
» Set of 8 pcs of3TB @ 7,2krpm SAS 3,5" HDD
» Set of 8 pcs of 300GB @ 15krpm SAS 3,5" HDD
» Set of 8 pcs of 450GB @ 15krpm SAS 3,5" HDD
» Set of 8 pcs of 600GB @ 15krpm SAS 3,5" HDD
CENA: 39174,34 PLN
