Gigabyte S453-S70 (rev. AAV1) 4th Gen Intel Xeon Scalable Storage Server System - 4U DP 36+2-Bay SATA/SAS 6NS453S70MR000AAV1

S453-S70  (rev. AAV1)

4th Gen Intel® Xeon® Scalable Storage Server System - 4U DP 36+2-Bay SATA/SAS  | Application: Storage  &  Networking 

• 4th Gen Intel® Xeon® Scalable Processors
• Intel® Xeon® CPU Max Series
• Dual processor, LGA 4677
• 8-Channel RDIMM DDR5 per processor, 16 x DIMMs
• 2 x 10Gb/s LAN ports (Intel® X710-AT2)
  2 x 1Gb/s LAN ports (Intel® I210-AT)
  1 x Dedicated management port
• 24 x 3.5"/2.5" SATA/SAS hot-swappable bays on front side
  12 x 3.5"/2.5" SATA/SAS hot-swappable bays on rear side
  2 x 2.5" SATA/SAS bays on rear side for boot drives
• SAS expander with 12Gb/s transfer speed
• 2 x M.2 slots with PCIe Gen4 x4 interface
• 6 x LP PCIe Gen5 x16 slots
• Dual 1600W (240V) 80 PLUS Titanium redundant power supply

Redefine Performance with 4th Gen Intel® Xeon® Scalable Processors

Dimensions (WxHxD, mm)
4U
482.6 x 177 x 625
Motherboard
MS73-HB0
CPU
4th Generation Intel® Xeon® Scalable Processors
Intel® Xeon® CPU Max Series
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor
Dual processor, CPU TDP up to 270W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Socket
2 x LGA 4677
Socket E
Chipset
Intel® C741 Chipset
Memory
16 x DIMM slots
DDR5 memory supported only
8-Channel memory per processor architecture
RDIMM modules up to 32GB supported*
Memory speed: Up to 4800 MHz

*NOTE: Total memory supports up to 512GB with 1600W power supply
LAN
Rear side:
2 x 10Gb/s LAN ports (1 x Intel® X710-AT2)
2 x 1GbE LAN ports (2 x Intel® I210-AT)
NCSI function supported (by switch setting)

1 x 10/100/1000 management LAN
Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
Storage
Front side:
24 x 3.5"/2.5" SATA/SAS hot-swappable bays, connected to expander

Rear side:
12 x 3.5"/2.5" SATA/SAS hot-swappable bays, connected to expander
2 x 2.5" SATA/SAS bays for boot drives, from onboard connector
- (Additional SAS card is required for SAS support on boot drives)

1 x Broadcom SAS35x48 expanders
Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port

SAS card is required to enable the drive bays

Recommended SAS cards: 
CSA4710
CRA4760
CRA4761

SAS
Supported
RAID
Depends on SAS add-on Card
Expansion Slots
6 x PCIe x 16 (Gen5 x16) low-profile slots

2 x M.2 slots:
- M-key
- PCIe Gen4 x4, from CPU_0
- Supports NGFF-2280/22100 cards
Internal I/O
2 x M.2 slots
1 x TPM header
1 x VROC connector
Front I/O
2 x USB 3.2 Gen1
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x HDD status LED
1 x System status LED
Rear I/O
2 x USB 3.2 Gen1
1 x VGA
1 x COM
4 x RJ45
1 x MLAN
1 x ID button with LED
Backplane I/O
Speed and bandwidth:
Front side - CBPD4O0: SATA 6Gb/s or SAS 12Gb/s
Rear side - CBP2021: SATA 6Gb/s or SAS 12Gb/s
Rear side - CBPD0C0: SATA 6Gb/s or SAS 12Gb/s
TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Power Supply
2 x 1600W 80 PLUS Titanium redundant power supply

AC Input:
- 100-127V~/ 12A, 50-60Hz
- 200-240V~/ 10A, 50-60Hz

DC Input:
- 240Vdc/ 8A

DC Output:
- Max 1000W/ 100-127V~
+ 12.2V/ 82A
+ 12.2Vsb/ 3A
- Max 1600W/ 200-240V~ or 240Vdc Input
+ 12.2V/ 132A
+ 12.2Vsb/ 3A

System Management
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup & Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings
OS Compatibility
Please refer to OS compatibility table in support page
System Fans
4 x 80x80x38mm (16,300rpm)
4 x 80x80x38mm (9,000rpm)
Operating Properties
Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
Packaging Dimensions
843 x 610 x 290 mm
Packaging Content
1 x S453-S70
2 x CPU heatsinks
6 x Carrier clips
1 x Rail kit
Part Numbers
- Barebone package: 6NS453S70MR000AAV1*
- Motherboard: 9MS73HB0NR-000
- Rail kit: 25HB2-3A6104-I0R
- CPU heatsink: 25ST1-323208-A0R
- Backplane board - CBP2021: 9CBP2021NR-00
- Backplane board - CBPD0C0: 9CBPD0C0NR-00
- Backplane board - CBPD4O0: 9CBPD4O0NR-00
- Fan module: 25420-8038B-D00R
- Fan module: 25ST2-883829-D0R
- Power supply: 25EP0-21600D-G1S

Power Efficiency

Automatic Fan Speed Control

GIGABYTE servers are enabled with Automatic Fan Speed Control to achieve the best cooling and power efficiency. Individual fan speeds will be automatically adjusted according to temperature sensors strategically placed in the servers.

High Availability

Smart Ride Through (SmaRT)

To prevent server downtime and data loss as a result of loss of AC power, GIGABYTE implements SmaRT in all our server platforms. When such an event occurs, the system will throttle while maintaining availability and reducing power load. Capacitors within the power supply can supply power for 10-20ms, which is enough time to transition to a backup power source for continued operation.

Smart Crises Management and Protection (SCMP)

SCMP is a GIGABYTE patented feature which is deployed in servers with non-fully redundant PSU design. With SCMP, in the event of faulty PSU or overheated system, the system will force the CPU into an ultra-low power mode that reduces the power load, which prevents the system from unexpected shutdown and avoids component damage or data loss.

Dual ROM Architecture

If the ROM that stores the BMC and BIOS fails to boot, the system will reboot with the backup BMC and/or BIOS replacing the primary. Once the primary BMC is updated, the ROM of the backup BMC will automatically update the backup through synchronization. For the BIOS, it can be updated based on user's choice of firmware version.

Hardware Security

Optional TPM 2.0 Module

For hardware-based authentication, the passwords, encryption keys, and digital certificates are stored in a TPM module to prevent unwanted users from gaining access to your data. GIGABYTE TPM modules come in either a Serial Peripheral Interface or Low Pin Count bus.

User Friendly

Tool-less Drive Bays Design

Clipping mechanism secures the drive in place. Install or replace a new drive in seconds.

Certified Ready with Software Partners

Being a member of key software alliance partner programs enables GIGABYTE to rapidly develop and validate joint solutions, enabling our customers to modernize their data centers and implement IT infrastructure and application services with speed, agility, and cost optimization.

Value-added Management

GIGABYTE offers free-of-charge management applications via a specialized small processor built on the server.

GIGABYTE Management Console

For management and maintenance of a server or a small cluster, users can use the GIGABYTE Management Console, which is pre-installed on each server. Once the servers are running, IT staff can perform real-time health monitoring and management on each server through the browser-based graphical user interface. In addition, the GIGABYTE Management Console also provides:

• Support for standard IPMI specifications that allows users to integrate services into a single platform through an open interface
• Automatic event recording, which can record system behavior 30 seconds before an event occurs, making it easier to determine subsequent actions
• Integrate SAS/SATA/NVMe devices and RAID controller firmware into GIGABYTE Management Console to monitor and control Broadcom® MegaRAID adapters.