Supermicro 2U 2113S-WTRT Single AMD EPYC 16 DIMMs 10x2.5

Supermicro 2U 2113S-WTRT Single AMD EPYC 16 DIMMs 10x2.5" SATA3 6xU.2 NVMe 1x PCI-E 3.0 x16 3x PCI-E 3.0 x8 2x 10GBase-T 1200W

Supermicro 2U 2113S-WTRT Single AMD EPYC 16 DIMMs 10x2.5" SATA3 6xU.2 NVMe 1x PCI-E 3.0 x16 3x PCI-E 3.0 x8 2x 10GBase-T 1200W

    

     

1x Socket SP3 AMD EPYC™ 7001/7002 CPU 16 DIMM DDR4 2U 16x2,5" HDD 2x1200W PSU 2x10G RJ45/1xIPMI

Towar dostępny na zamówienie
SKU
AS -2113S-WTRT

Supermicro SuperServer 2113S-WTRT 1x Socket SP3 AMD EPYC™ 7001/7002 CPU 16 DIMM DDR4 2U 16x2,5" HDD 2x1200W PSU 2x10G RJ45/1xIPMI 2xFH 3xLP PCI-E 3.0 Hybrid backplane

Motherboard
H11SSW-NT
Processor/Chipset
CPU
  • Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required)
  • Socket SP3
  • Supports CPU TDP 225W / cTDP up to 240W*
Cores
  • Up to 32 Cores (Board revision 1.x + 7001 Processors)
  • Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset
  • System on Chip (SoC)
System Memory
Memory Capacity
  • 16 DIMM slots
  • Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
  • Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
  • 8-channel memory bus
Memory Type
  • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors)
  • DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*
    (* Board revision 2.x required + 7002 Processors)
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Controllers
  • Broadcom BCM57416 Controller
VGA
  • ASPEED AST2500 BMC
Expansion Slots
PCI Express
  • 1 PCI-E 3.0 x16 (FH/HL) slot
  • 2 PCI-E 3.0 x8 (FH/HL) slots
  • 2 PCI-E 3.0 x8 (LP) slots
M.2
  • Interface: PCI-E 3.0 x2 (NVMe based)
  • Form Factor: 2280, 22110
  • Key: Onboard M-key
  • Number of M.2: Dual
Input / Output
NVMe
  • Up to 6 U.2 NVMe support via additional cables
SATA
  • 16 SATA3 (6 Gbps) ports
LAN
  • 2x 10GbBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 5 USB 3.0 ports (4 rear + 1 Type A)
VGA
  • 1 VGA port
Others
  • 1 COM port
  • 2 SATA DOM power connectors
  • TPM 1.2 header
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1
System BIOS
BIOS Type
  • AMI 128Mb SPI Flash EEPROM
BIOS Features
Product SKUs
AS -2113S-WTRT
  • A+ Server 2113S-WTRT
Dimensions and Weight
Height
  • 3.5" (89mm)
Width
  • 17.2" (437mm)
Depth
  • 24.8" (630mm)
Package
  • 11" (H) 29" (W) 38.7" (D)
Weight
  • Net Weight: 34 lbs (15.42 kg)
  • Gross Weight: 59 lbs (26.76 kg)
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
Drive Bays
Hot-swap
  • 16 hot-swap 2.5" SATA3 drive bays
  • Optional 6 U.2 NVMe drive support with additional cables
Peripheral Drives
Optional
  • Optional slim DVD-ROM drive
Backplane
Hybrid Backplane
  • Supports up to 8x 2.5" SAS3/SATA3 HDD/SSD and 6x SAS3/SATA3/NVMe Storage Devices
System Cooling
Fans
  • 3 heavy-duty PWM fans with optimal fan speed control
Air Shroud
  • 1 Air Shroud
Power Supply (76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power
  • 1000W/1200W
Dimension
(W x H x L)
  • 76 x 40 x 336 mm
Input
  • 100-127Vac / 15-12A / 50-60Hz
  • 200-240Vac / 8.5-7A / 50-60Hz
  • 200-240Vdc / 8.5-7A (for CCC only)
+12V
  • Max: 83A / Min: 0A (100-127Vac)
  • Max: 100A / Min: 0A (200-240Vac)
  • Max: 100A / Min: 0A (200-240Vdc)
+5Vsb
  • Max: 4A / Min: 0A
Output Type
  • 19 Pairs Gold Finger Connector
Certification Platinum Level Certified95%+ Titanium Level
[ Test Report ]
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
  • CPU switching voltage regulator
FAN
  • Up to 6-fan status tachometer monitoring
  • Up to six 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 6x Fan connectors
  • I²C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
Chassis
Form Factor
  • 2U
Model
Więcej informacji
Rozmiar obudowy 2U Rack
ilość nodów 1
Procesor CPU AMD EPYC™
Producent Procesora AMD
podstawka procesora SP3
Chipset SoC
ILOŚĆ PROCESORÓW 1xCPU
ilość slotów pamięci 16 DIMM slots
Typ pamięci DDR4 DIMM
Standard pamięci DDR4-2933 MHz
interfejs SSD/HDD PCIe 3.0 x4/x8, SATA
rozmiar kieszeni hdd/ssd 2.5" 15mm
kieszenie 2.5'' 16
złącza M.2 2
moc zasilaczy 1200W
ceryfikaty zasilaczy 80 plus Titanium
redundancja zasilaczy tak
Napisz własną recenzję
Tylko zarejestrowani użytkownicy mogą pisać Recenzje. Proszę Zaloguj się lub Załóż konto
test
Zapytaj o cenę
Trwa wysyłanie wiadomości...

Wiadomość została wysłana. Dziękujemy.

Wiadomość NIE została wysłana. Prosimy wypełnić prawidłowo wszystkie pola.
Wiadomość NIE została wysłana. Prosimy o kontakt z Działem Handlowym.
Produkt

Konfiguracja

Imię i nazwisko
Adres e-mail
Nazwa firmy
Treść wiadomości